Pinch protection
If the closing force exceeds a specific value as a window closes, the closing action is interrupted. The window reopens slightly.
Danger of pinching even with pinch protection
Even with the pinch protection system, check that the window's closing path is clear; otherwise, the closing action may not stop in certain situations, e.g., if thin objects are present.
Window accessories
Do not install any accessories in the range of movement of the windows; otherwise, the pinch protection system will be impaired.
Closing without the pinch protection system
Danger of pinching
Monitor the closing process and make sure that the closing path of the window is clear; otherwise, injuries may result.
For example, if there is an external danger or if ice on the windows prevents a window from closing normally, proceed as follows:
1. Pull the switch past the resistance point and
hold it there.
Pinch protection is limited and the window
reopens slightly if the closing force exceeds
a certain value.
2. Pull the switch past the resistance point
again within approx. 4 seconds and hold it
there.
The window closes without pinch protection.
See also:
Initializing after a power failure
After a power failure during the opening or closing
process, the roof can only be operated to a
limited extent.
Initializing the system
The system can be initialized when the vehicle
is statio ...
Remove attached parts following use
Remove unneeded auxiliary mirrors, roof or rear
luggage racks after use.
Attached parts on the vehicle impair the aerodynamics
and increase the fuel consumption. ...
Following the initial pairing
The mobile phone is detected/connected in
the vehicle within a short period of time
when the engine is running or the ignition is
switched on.
The phone book entries of the telephone
...