The concept
The system does not measure the actual inflation pressure in the tires.
It detects a pressure loss in a tire by comparing the rotational speeds of the individual wheels while moving.
In the event of a pressure loss, the diameter and therefore the rotational speed of the corresponding wheel change. This is detected and reported as a flat tire.
See also:
Drive-off assistant
This system supports driving away on gradients.
The parking brake is not required.
1. Hold the vehicle in place with the foot brake.
2. Release the foot brake and drive away without
delay.
Depen ...
Pressure specifications
The tire inflation pressure table, refer to
page 238, contains all pressure specifications
for the specified tire sizes at the ambient temperature.
Pressure specifications apply to approved
tire ...
iDrive in the rear
Operation is the same as for the iDrive in the
front.
To adjust the volume: turn, arrows 1.
To activate the controller and switch between
the screens: press the buttons, arrows
2.
...