Display on the Control Display
Switching on the backup camera via iDrive
With Top View switched on:
"Rear view camera"
The backup camera image is displayed. The setting is stored for the remote control currently in use.
Brightness
With Top View switched on:
1. "Brightness"
2. Turn the controller until the desired setting is reached and press the controller.
Contrast
With Top View switched on:
1. "Contrast"
2. Turn the controller until the desired setting is reached and press the controller.
Displaying the turning circle and pathway lines
▷ The static, red turning circle line shows the space needed to the side of the vehicle when the steering wheel is turned all the way.
▷ The variable, green pathway line assists you in assessing the amount of space actually needed to the side of the vehicle.
The pathway line is dependent on the current steering angle and is continuously adjusted with the steering wheel movement.
"Parking aid lines"
Turning circle and pathway lines are displayed.
See also:
Engaging the transmission position
▷ Transmission position P can only be disengaged
if the engine is running and the brake
pedal is pressed.
▷ With the vehicle stationary, press on the
brake pedal before shifting out ...
Malfunction
HDC is temporarily unavailable in the following
situations due to a high brake temperature:
▷ The LED in the button and the display HDC
go out during HDC operation.
▷ The LED in the ...
TeleService
General information
TeleService supports communication with your
service center.
▷ Data on the vehicle's service requirements
can be sent directly to the service center. In
this way, the ...