Check oil level

The concept

The oil level is monitored electronically during driving and shown on the Control Display.

If the oil level reaches the minimum level, a check control message is displayed.

Displaying the oil level

1. "Vehicle Info".

2. "Vehicle status".

3. Possible messages "Engine oil level"

Possible messages

▷ "Engine oil level OK".

▷ "Engine oil at minimum. Add 1 quart of engine oil!".

Within the next 125 miles/200 km, a maximum of 1 US quart/liter oil.

▷ "Engine oil level below minimum. Add 1 quart!".

Immediately add 1 US quart/liter of oil.

Detailed measurement

Requirements:

▷ Vehicle is on a level road and the engine is running at operating temperature.

▷ Manual transmission: Shift lever in neutral position clutch and gas pedal not depressed.

▷ Automatic transmission: Selector lever in transmission position N or P and gas pedal not depressed.

In order to perform a detailed measurement of the engine oil level:

1. "Vehicle Info".

2. "Vehicle status".

3. 4. "Start measurement" "Measure engine oil level".

4. "Start measurement"

The oil level is checked and displayed via a scale.

During the detailed measurement, the idle speed is increased somewhat.

Duration: approx. 1 minute.

    See also:

    At a glance
    These overviews of buttons, switches and displays are intended to familiarize you with your vehicle. You will also become quickly acquainted with the available control concepts and options. ...

    Starting destination guidance after entering the destination
    1. "Accept destination" 2. "Start guidance" or "Add as another destination" Add, a destination as a further destination. ...

    Display on the Control Display
    The traffic area to the left and right is displayed on the Control Display. Guidelines at the bottom of the image show the position of the front of the vehicle. Brightness With the Side View ...