Safety belts

Seats with safety belt

The vehicle has five seats, each of which is equipped with a safety belt.

Notes

Always make sure that safety belts are being worn by all occupants before driving away.

Although airbags enhance safety by providing added protection, they are not a substitute for safety belts.

▷ The shoulder strap's anchorage point will be correct for adult seat occupants of every build if the seat is correctly adjusted.
▷ The two outer safety belt buckles, integrated into the rear seat, are for passengers sitting on the left and right.
▷ The center rear seat belt buckle marked with the letters CENTER is solely intended for the center passenger.

Never allow more than one person to wear One person per safety belt
Never allow more than one person to wear a single safety belt. Never allow infants or small children to ride on a passenger's lap.◀

Lay the belt, without twisting, snugly Putting on the belt
Lay the belt, without twisting, snugly across the lap and shoulders, as close to the body as possible. Make sure that the belt lies low around the hips in the lap area and does not press on the abdomen. Otherwise, the belt can slip over the hips in the lap area in a frontal impact and injure the abdomen.

The safety belt must not lie across the neck, rub on sharp edges, be routed over solid or breakable objects, or be pinched.◀

Avoid wearing clothing that prevents the Reduction of restraining effect
Avoid wearing clothing that prevents the belt from fitting properly, and pull the shoulder belt periodically to readjust the tension across your lap; otherwise, the retention effect of the safety belt may be reduced.◀

See also:

The concept
The rear view camera assists you when parking and maneuvering in reverse. To accomplish this, the region behind your vehicle is shown on the Control Display. ...

Safety
Standard safety features include front-, side-impact and side curtain airbags. Active head restraints, antilock brakes and an electronic stability system are also standard. Blind spot and lane dep ...

Maintaining/storing the speed
Press the button. or: Press the rocker switch while the system is interrupted. When the system is switched on, the current speed is maintained and stored as the desired speed. It is d ...