Displays in the instrument cluster

Selected program

displayed The selected program is displayed in the tachometer.

Program selection

list Pressing the button displays a list of the selectable programs.

Display on the Control Display

Program changes can be displayed briefly on the Control Display.

To do so, make the following settings:

1. "Settings"
2. "Driving mode"
3. "Driving mode info"

    See also:

    Buckling the belt
    Make sure you hear the latch plate engage in the belt buckle. Tensioning the safety belt automatically After the belt is buckled and the door is closed, the belt is tightened once automatica ...

    Switching on/off
    Press the button. ▷ On: the LED lights up. ▷ Off: the LED goes out. The system can issue warnings at speeds above approx. 40 mph/65 km/h. The state is stored for the remote contro ...

    Configuring the warning time
    After the warning function is switched on, the warning time can be set via the iDrive. For a late warning time, prewarning is deactivated. These settings have no effect on the time of the warni ...