System limits
Check the traffic situation as well
Check the traffic situation around the vehicle with your own eyes. Otherwise, an accident could result from road users or objects located outside the picture area of the backup camera.
Detection of objects
High, protruding objects such as ledges may not be detected by the backup camera.
See also:
Programming
Programming
1. Memory buttons
2. LED
Fixed-code hand-held transmitters
1. Switch on the ignition, refer to page 61.
2. Initial setup:
Press both outer memory buttons 1 for approx.
20 seconds ...
Releasing
With the ignition switched on:
Manual transmission: Press the
switch
while the brake or clutch is pressed.
Automatic transmission: Press the switch while
the brake is pressed or transmission ...
Operating the programs
For Dynamic Damper Control*, the lower button
is labeled with COMFORT.
Automatic program change
The system automatically switches to NORMAL
in the following situations:
Failure of Integral ...