The concept

This system can replace up to three different hand-held transmitters for various types of remote- controlled equipment, such as garage doors or lighting systems.

The hand-held transmitter signal can be programmed on one of the three memory buttons.

The corresponding device can then be operated using the programmed memory button.

The LED indicates that a signal is being transmitted. When selling the vehicle, delete the stored programs for security reasons.

During programming and before activating During programming

During programming and before activating a device using the universal remote control, ensure that there are no people, animals, or objects in the range of movement of the remotecontrolled device; otherwise, there is a risk of injury or damage.

Also follow the safety instructions of the handheld transmitter.

    See also:

    System limits
    Personal judgment The system cannot serve as a substitute for the driver's personal judgment of the traffic situation. The system assists the driver and does not replace the human eye. The s ...

    Jump-starting
    Notes If the battery is discharged, an engine can be started using the battery of another vehicle and two jumper cables. Only use jumper cables with fully insulated clamp handles. To prevent pe ...

    Starting destination guidance
    1. "Navigation" 2. Enter the destination. 3. "Accept destination" 4. "Start guidance" ► The route is shown on the Control Display. ► The distance to the ...