Determining the load limit

1. Locate the following statement on your vehicle’s

1. Locate the following statement on your vehicle’s placard*:

  • The combined weight of occupants and cargo should never exceed XXX kg or YYY lbs. Otherwise, damage to the vehicle and unstable driving situations may result.

2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.

3. Subtract the combined weight of the driver and passengers from XXX kilograms or YYY pounds.

4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the YYY amount equals 1,000 lbs and there will be four 150 lbs passengers in your vehicle, the amount of available cargo and luggage load capacity is 400 lbs: 1,000 lbs minus 600 lbs = 400 lbs.

5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.

Load

The maximum load is the sum of the weight of

The maximum load is the sum of the weight of the occupants and the cargo.

The greater the weight of the occupants, the less cargo that can be transported.

The maximum load is the sum of the weight of

The maximum load is the sum of the weight of the occupants and the cargo.

The greater the weight of the occupants, the less cargo that can be transported.

    See also:

    Requirements
    Equipment version with full preparation package mobile phone. An Emergency Request can be made, even if no mobile phones are paired with the vehicle. BMW Assist is activated. The radio ...

    Powertrain: The essence of BMW EfficientDynamics.
    The new BMW 5-Series will be offered in the United States with a choice of three gasoline engines. At its introduction, the new 5-Series will be available as a 535i and 550i. The 528i and xDrive a ...

    Transmitting the settings
    Your personal settings can be taken with you to another vehicle equipped with the Personal Profile function. For more information, contact your service center. Transmission takes place via: & ...