Opening and closing: Using the remote control
Persons or animals in a parked vehicle could
lock the doors from the inside. You should therefore take the remote control with
you when you leave the vehicle so that the latter can be opened from outside.
Convertible: to operate the convertible top with
the remote control, the doors and trunk lid must be closed and the cargo area partition
must be folded down and engaged on both sides. Refer also to page 42.
Unlocking
Press the button.
The interior lamps, the courtesy lampsand the welcome lamps come on.
Setting unlocking characteristics
You can set whether only the driver's door or the entire vehicle is to be unlocked when the button is pressed for the first time.
1. "Settings"
2. "Door locks"
3. "Unlock button"
4. Select a menu item:
> "All doors"
Press the button once to unlock the entire vehicle.
> "Driver's door only"
Pressing the button once unlocks the driver's
door and fuel filler flap. Press the button twice to unlock the entire vehicle.
5. Press the controller.
Coupe: convenient opening
Press and hold the button.
The windows and the glass roofare opened.
Convertible: convenient openingWhen you are close to the vehicle, the remote control for Comfort Access can be used to open
the convertible top and windows.
Hold the button down.
The windows and the convertible top are opened provided that the doors are closed.
If you continue pressing the button, the windows
move up.
Watch during the opening process to ensure that
no one is injured. Releasing the button interrupts the opening process.
Press the button.
Do not lock the vehicle from the outside if
there is any person inside, because the vehicle cannot be unlocked from inside without
special knowledge.
Convertible: convenient closing
When you are close to the vehicle, the remote control for Comfort Access can be used to close the convertible top and windows.
Press and hold the button.
The convertible top and the windows are closed.
Watch during the closing process to ensure that
no one is injured. Releasing the button interrupts the closing process.
While the car is locked: Press the button.
You can also use this function to locate your
vehicle in parking garages etc.
Unlocking the trunk lidPress the button for about 1 second and then
release it.
The trunk lid opens a short distance, regardless of whether it was locked or unlocked.
The trunk lid swings backward and up when opened.
Make sure that adequate
clearance is available before opening.
To avoid locking yourself out by accident, do not place the remote control in the cargo area. A previously locked trunk lid is locked again after closing.
Before and after each trip, check that the trunk lid has not been inadvertently unlocked.
Confirmation signalsYou can activate or deactivate the confirmation signals.
1. "Settings"
2. "Door locks"
3. "Flash when lock/unlock"
4. Press the controller.
Calling up the driver's seat positionThe driver's seat position last set is stored for the remote control currently in use.
You can select whether or not the seat is reset to that position automatically.
When this Personal Profile function is used,
first make sure that the footwell behind the driver's seat is free of obstacles.
Failure to do so could cause injury to persons or damage to objects as a result of a rearward movement of the seat.
The adjusting procedure is halted when you touch a seat adjustment switch or one of the memory buttons.
Selecting automatic call-up
1. "Settings"
2. "Door locks"
3. "Last seat position auto."
The setting is stored for the remote control currently in use.
MalfunctionsThe remote control may malfunction due to local radio waves. If this occurs, unlock and lock the car at the door lock with the integrated key.
Coupe: in vehicles without an alarm systemor Comfort Access, only the driver's door can be unlocked and locked using the integrated key in the door lock.
If the car can no longer be locked with a remote control, the battery in the remote control is discharged. Use the remote control on an extended trip to recharge the battery. The remote control for Comfort Access contains a battery that may have to be changed.
For US owners onlyThe transmitter and receiver units comply with part 15 of the FCC/Federal Communications Commission regulations. Operation is governed by the following:
FCC ID: LX8766S LX8766E LX8CAS
Compliance statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
> This device must not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
Any unauthorized modifications or changes to
these devices could void the user's authority to operate this equipment.
See also:
Warning stages
Prewarning
This warning is issued, for example, when there
is the impending danger of a collision or the distance
to the vehicle ahead is too small.
Acute warning
Warning of the imminent danger ...
Resetting the tone settings
1. "CD/Multimedia", "Radio" or "Settings"
2. "Tone"
3. "Reset" ...
Visual warning
The approach of the vehicle to an object can be
shown on the Control Display.
When the distance to an object is small, a red bar
is shown in front of the vehicle, as it is in the PDC
display.
...