Transmission positions

D Drive, automatic position

Position for normal vehicle operation. All forward gears are available.

R is Reverse

Select only when the vehicle is stationary.

N is Neutral

Use in automatic car washes, for example. The vehicle can roll.

When the ignition is switched off, position P is engaged automatically.

P Park

Select only when the vehicle is stationary. The drive wheels are blocked.

P is engaged automatically:

▷ After the engine is switched off, if the car is in radio ready state, or if the ignition is switched off, and if position R or D is engaged.

▷ With the ignition is off, if position N is engaged.

▷ If the safety belt is unbuckled, the driver's door is opened, and the brake pedal is not pressed while the vehicle is stationary and transmission position R or D is engaged.

Before exiting the vehicle, make sure that position P of the automatic transmission is engaged.

Otherwise, the vehicle may begin to roll.

Kickdown

Kickdown is used to achieve maximum driving performance. Press on the gas pedal beyond the resistance point at the full throttle position.

    See also:

    At a glance
    1 Function bar 2 Route section with traffic obstruction 3 Traffic sign for traffic obstruction 4 Planned route 5 Current location 6 Upper status field 7 Lower status field Lines in the map S ...

    Radar sensor
    Position Radar sensor Dirty or covered sensor A dirty or covered sensor may hinder the detection of vehicles. ▷ If necessary, clean the radar sensor. Remove layers of snow and ice care ...

    The concept
    iDrive integrates the functions of a large number of switches. This allows these functions to be operated from a single central position. Make entries only when traffic and road conditions per ...