Initializing after a power failure

After a power failure during the opening or closing process, the roof can only be operated to a limited extent.

Initializing the system

The system can be initialized when the vehicle is stationary and the engine is running.

During the initialization, the roof closes without pinch protection.

Monitor the closing process and make Danger of pinching
Monitor the closing process and make sure that the closing path of the glass sunroof is clear; otherwise, injuries may result.◀

until the initialization is complete: Press the switch up and hold it until the initialization is complete:

▷ Initialization begins within 15 seconds and is completed when the sunroof and sliding visor are completely closed.
▷ The roof closes without pinch protection.

    See also:

    Exterior
    BMW says the front-end modifications for 2006 have been "executed with the utmost reserve and subtlety." In addition to the restyled hood, the 7 Series sedans have reshaped rocker panels ...

    Status display
    The current status of the Tire Pressure Monitor TPM can be displayed on the Control Display, e.g., whether or not the TPM is active. 1. "Vehicle Info" 2. "Vehicle status" 3. ...

    Displaying, setting or changing the limit
    1. "Settings" 2. "Speed" 3. "Warning at:" Warning at 4. Turn the controller until the desired limit is displayed. 5. Press the controller. The speed limit is st ...