Low tire pressure message
The yellow warning lamp lights up. A Check Control message is displayed.
- There is a flat tire or a major loss in tire inflation pressure.
- The system was not reset after a wheel change and thus warns based on the inflation pressures initialized last.
1. Reduce your speed and stop cautiously. Avoid sudden braking and steering maneuvers.
2. Check whether the vehicle is fitted with regular tires* or run-flat tires*.
Run-flat tires, are labeled with a circular symbol containing the letters RSC marked on the tire sidewall.
When a low inflation pressure is indicated, DSC Dynamic Stability Control is switched on if necessary.
See also:
Preparation
1. Check whether the battery of the other vehicle
has a voltage of 12 volts and approximately
the same capacitance in Ah. This information
can be found on the battery.
2. Switch off the engine ...
Adjusting
Vehicle
Equipment
...
Malfunction
A Check Control message is displayed.
On the Control Display, the areas in front of and
behind the vehicle are shaded. PDC has failed.
Have the system checked.
To ensure full operability:
` ...