Display on the Control Display
Switching on the backup camera via iDrive
With PDC activated:
"Rear view camera"
The backup camera image is displayed. The setting is stored for the remote control currently in use.
Brightness
With the backup camera switched on:
1. 
Select the symbol.
2. Turn the controller until the desired setting is reached and press the controller.
Contrast
With the backup camera switched on:
1. 
Select the symbol.
2. Turn the controller until the desired setting is reached and press the controller.
See also:
Wiper blade replacement
General information
Do not fold down the wipers
without wiper
blades
Do not fold down the wipers if wiper blades have
not been installed; this may damage the windshield.
Replacing the wiper ...
System limits
Speed range
Best results are achieved when using the system
on well-developed roads and highways.
The desired speed can be selected between
20 mph/30 km/h to 110 mph/180 km/h.
The system can al ...
Ventilation
Front ventilation
► Lever for changing the air flow direction, arrow 1.
► Thumbwheels for opening and closing the
vents continuously, arrows 2.
► Thumbwheel to vary the tempera ...