Ignition lock

Insert the remote control into the ignition lock

Insert the remote control all the way into the ignition lock.

Insert the remote control all the way into the ignition lock.

> Radio readiness is switched on.

Individual electrical consumers can operate.

Comfort Access

If the car is equipped with Comfort Access, only insert the remote control into the ignition lock under special circumstances.

Removing the remote control from the ignition lock

of the ignition lock as this may cause damage. Do not forcibly pull the remote control out of the ignition lock as this may cause damage.

Before removing the remote control, push it all the way in to release the locking mechanism.

> The ignition is switched off if it was on.

Automatic transmission

You cannot take out the remote control unless the selector lever is in the P position: interlock.

    See also:

    Personal Profile settings
    The following functions and settings can be stored in a profile. More information on the settings can be found under: ► Collision warning: warning time, last setting on/off. ► Ex ...

    The concept
    The vehicle can be accessed without activating the remote control. All you need to do is to have the remote control with you, e.g., in your jacket pocket. The vehicle automatically detects the r ...

    Wiper blade replacement
    General information Do not fold down the wipers without wiper blades Do not fold down the wipers if wiper blades have not been installed; this may damage the windshield.◄ Replacing the fro ...