Check Control

The concept

The Check Control monitors vehicle functions and alerts you to any malfunctions in the systems monitored. Such a Check Control message includes indicator and warning lamps in the instrument cluster and, in some circumstances, an acoustic signal as well as text messages at the top of the Control Display.

Indicator and warning lamps

Indicator and warning lamps can light up in a variety of combinations and colors.

Indicator and warning lamps can light up in a variety of combinations and colors.

Several of the lamps are checked for proper functioning and light up temporarily when the engine is started or the ignition is switched on.

indicates that Check Control messages have been

stored. These Check Control messages can be viewed again later. indicates that Check Control messages have been stored. These Check Control messages can be viewed again later.

Text messages

Text messages at the upper edge of the Control Display explain the meaning of the displayed indicator and warning lamps.

Supplemental text messages

You can call up more information on the Control Display, e.g. on the cause of a malfunction and on how to respond, via Check Control.

Hiding Check Control messages

Press the button on the turn signal/high beam lever.

Press the button on the turn signal/high beam lever.

> Some Check Control messages are displayed continuously and remain visible until the malfunction has been rectified. If several malfunctions occur at once, the messages are displayed consecutively.

These messages can be hidden for approx. 8 seconds. After this, they are displayed again automatically.

> Other Check Control messages are hidden automatically after approx. 20 seconds. They are marked with the symbol shown here.

> Other Check Control messages are hidden automatically after approx. 20 seconds. They are stored and can be displayed again

later.

They are marked

with the symbol shown here. They are marked with the symbol shown here.

The text of urgent messages is displayed automatically.

To exit the display:

Select "OK" and press the Controller.

Symbols

Depending on the Check Control message, you can select from among the following functions in the supplementary text messages.

> > "Roadside Assistance" "Service request" Contact your BMW center.
> Contact BMW Roadside Assistance. "Roadside Assistance"

Contact BMW Roadside Assistance.

Displaying stored Check Control messages

1.  Push button 1in the turn signal/high beam lever up or down repeatedly

1.  Push button 1in the turn signal/high beam lever up or down repeatedly until the appropriate symbol appears in the display, accompanied by the words "CHECK".
2.  Press button 2.

"CHECK OK" appears if there are no Check Control messages. If a Check Control message has been stored, the corresponding lamp lights up. It is accompanied by a text message on the Control Display.

3.  Push button 1to check for other messages.
4.  Press button 2.

The display again shows the outside temperature and the time.

Via iDrive

1.  "Vehicle Info"
2.  "Vehicle status"
3.  "Check Control"

4.  Select the text message.

4.  Select the text message.

    See also:

    Deleting contacts
    Only contacts that are stored in the vehicle are deleted. The contacts on the mobile phone cannot be deleted. 1. "Office". 2. "Contacts". 3. Highlight the contact. 4. Open ...

    Stored stations
    General information It is possible to store up to 40 stations. Calling up a station 1. "Radio" 2. "Presets" 3. Select the desired station. Storing a station The station curr ...

    Securing cargo
    Lashing eyes in the cargo area To secure the cargo, there are four lashing eyes in the cargo area Lashing eyes in the cargo area with rails To secure the cargo, there are four movable lashing ...