Instrument lighting

You can adjust the brightness of the instrument lighting only when the parking lamps or the low beams are switched on.

1.  Push button 1in the turn signal/high beam lever up or down repeatedly

1.  Push button 1in the turn signal/high beam lever up or down repeatedly until the appropriate symbol appears in the display, accompanied by the brightness level and the word "SET".
2.  Press button 2.

3.  Push button 1up or down to select the desired brightness level.

3.  Push button 1up or down to select the desired brightness level.
4.  Press button 2.

The display again shows the outside temperature and the time.

    See also:

    Calibrating the digital compass
    The digital compass must be calibrated in the event of the following: ▷ The wrong point of the compass is displayed. ▷ The point of the compass displayed does not change despite chan ...

    Vehicle equipment
    All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, ...

    Turn signals, front
    24-watt bulb, PY24W 1. Rotate bulb holder to the left and remove it along with the bulb. 2. Rotate the bulb to the right along with the socket and replace. 3. Install in the reverse order. ...