Rain sensor
If the car is equipped with a rain sensor, the time between wipes is controlled automatically and depends on the intensity of the rainfall.
The rain sensor is mounted on the windshield, directly in front of the interior rearview mirror.
Activating the rain sensor
Activating the rain sensor
Press the button, arrow 3.
The LED in the button lights up.
Rain sensor sensitivity
Turn thumbwheel 5 up or down.
Deactivating the rain sensor
Press the button again, arrow 3.
The LED goes out.
Deactivate the rain sensor in car washes
Deactivate the rain sensor when passing
through an automatic car wash; otherwise, damage
could be caused by undesired wiper activation.◀
See also:
TRACTION
When TRACTION is active, the vehicle has maximum
traction on loose road surfaces. DTC Dynamic
Traction Control, refer to page 105, is activated.
Driving stability is limited during
acceleration ...
Seat and mirror memory
General information
Two different driver's seat and exterior mirror
positions can be stored and retrieved for each
remote control. Settings for the backrest width
and lumbar support are not stor ...
At a glance
At a glance
0 Lamps off and daytime running lights
1 Parking lamps and daytime running lights
2 Low-beam headlamps and welcome lamps
3 Automatic headlamp control, daytime runninglights, welcome ...