Transmission positions
D Drive, automatic position
Position for normal vehicle operation. All forward gears are available.
Under normal operating conditions, fuel consumption is lowest when you are driving in position D.
Kickdown
Kickdown is used to achieve maximum driving performance. Press on the accelerator beyond the resistance point at the full throttle position.
R is Reverse
Select only when the vehicle is stationary.
N is Neutral
Use in automatic car washes, for example. The vehicle can roll.
When the ignition is switched off, position P is engaged automatically.
P Park
Select only when the vehicle is stationary. The drive wheels are blocked.
P is engaged automatically as soon as the engine is switched off unless N is engaged and, in vehicles with Comfort Access, the remote control is inserted in the ignition lock. Before leaving the vehicle, ensure that the transmission position P is engaged; otherwise, the vehicle may begin to roll.
See also:
Radar sensor
Position
Radar sensor
Dirty or covered sensor
A dirty or covered sensor may hinder the detection
of vehicles.
▷ If necessary, clean the radar sensor. Remove
layers of snow and ice care ...
Opening/closing the sliding visor
▷ Press the switch in the
desired
direction to the resistance
point and hold it there.
The sliding visor moves while
the switch is being held.
▷ Press the switch in the desired ...
Adjusting the height: manual head
restraints
Adjusting the height: manual head
restraints
▷ To raise: pull.
▷ To lower: press the button, arrow 1, and
push the head restraint down. ...