Strength of the driver's and front passenger airbag
The strength with which the driver's and front passenger airbags are triggered depends on the position of the driver's and front passenger seats.
To maintain the accuracy of this function over the long-term, calibrate the front seats when a corresponding message appears on the Control Display.
Calibrating the front seats
A corresponding message appears on the Control Display.
1. Move the respective seat forward all the way.
2. Move the respective seat forward again. It moves forward briefly.
3. Readjust the seat to the desired position.
The calibration procedure is completed when the message on the Control Display disappears.
If the message continues to be displayed, repeat the calibration.
If the message does not disappear after a repeat calibration, have the system checked as soon as possible.
Unobstructed area of movement
Ensure that the area of movement of the seats is unobstructed to avoid personal injury or damage to objects.
See also:
Tow fitting
The screw-in tow fitting should always be carried
in the vehicle. It can be screwed in at the
front or rear of the BMW. It is located in the container
on the inside of the trunk lid.
Tow fit ...
VALVETRONIC, Double-Vanos and direct injection
The combination of a high power output and a simultaneous reduction in
emissions is achieved by VALVETRONIC variable valve timing and Double-Vanos
variable camshaft timing. The latest generation o ...
Connecting a specific device
If more than one device is detected by the vehicle,
the device at the top of the list is connected.
A different device can be connected by selecting
it.
1. "Telephone"
2. "Bluet ...