Contacts
See also:
Radar sensor
Position
Radar sensor
Dirty or covered sensor
A dirty or covered sensor may hinder the detection
of vehicles.
If necessary, clean the radar sensor. Remove
layers of snow and ice carefull ...
Programming
General information
1. Switch on the ignition.
2. Initial setup:
Press and hold the left and right button on
the interior rearview mirror simultaneously
for approximately 20 seconds until the L ...
Initialization
The initialization process adopts the set inflation
tire pressures as reference values for the detection
of a flat tire. Initialization is started by confirming
the inflation pressures.
Do not ...
